Nordic DevZone

Recent and unreplied - Help your fellow developer and earn points!

Not Answered

DFU device not visible with BLED112 0

Hi, I use SDK v10, S110 v8 and dfu_dual_bank_ble_s100_pca10028. My application has dfu support. I reset to bootloader from application after writing 0x0104 to dfu control...

457 views

0 replies

Started over 10 years ago
by user7065
Not Answered
Hello all, my question is related to connection interval and to transmission distance. 0

I have a nRF51822 device. When the connection interval is 50ms. The transmission distance can up to 50m+. But, when the connection interval is 1000ms. The transmission...
4414 views

0 replies

Started over 10 years ago
by user13748
Not Answered

ble-sniffer nrf51822 v 2.0 Kali Linux 0

Hi, I have a simple question. It is possible to use the ble-sniffer nrf51822 on Kali Linux? I found a guide to use it on linux but I don't know if it is the same for Kali...

906 views

0 replies

Started over 10 years ago
by user13145
Not Answered
Windows 10 Code 10 during HoG enumeration - "Driver Error" 0

I've modified Nordic's "Nordic_Keyboard" sample to work with my custom board, just simple modifications to use custom_board.h rather than the default PC10028 configuration...
1131 views

0 replies

Started over 10 years ago
by user9501
Not Answered
S110 HID read datas from smartphone 0

Hi, I use HID application with S110 v8.0 profil. I use BLE HID Keyboard example. I put datas from smartphone to BOOT KEYBOARD OUTPUT REPORT and I whant read them by...
- nrf51822 s110 hid get data
431 views

0 replies

Started over 10 years ago
by user13388

Recent in Nordic blog

Use Microbit to create a remote controlled car

user14453

The ultra simple to use pxt editor for Microbit (https://pxt.microbit.org/) supports sending data using the nRF51822 radio. The tool supports using both BLE and proprietary protocols. For this project…
- 27 Oct 2016
We developed tiny robots for swarm robotics research using nRF51422 (mROBerTO)!

user7666

mROBerTO (milli-ROBot-TOronto) is a small modular millirobot designed and implemented for swarm robotics research. It was first featured in the 2016 IEEE/RSJ International Conference on Intelligent Robots…
- 25 Oct 2016
Segger Embedded Studio - A Cross Platform IDE

Hung Bui

Download and Setup Download Embedded Studio >= v3.10e Download and install the J-Link Software and Documentation Pack >= v6.10g Download and unzip Nordic's nRF5 SDK >= v12.0.1 Note…
- 21 Oct 2016

Latest guides

Hardware design, test and measurement: nRF52832 Specific PCB Guidelines

user9102

This guide will cover the specific areas that must be paid extra attention to when designing a PCB for nRF52832. It is intended as a nRF52832 specific addition to the General PCB design guidelines for…
- 10 Jun 2020
Hardware design, RF test and coverage: iBasis eSIM International Coverage Update

user2124

Since Nordic Semiconductor announced that it has partnered with one of the world’s largest international cellular carriers, iBASIS, to use nRF9160 System-in-Package (SiP) module and to include an iBasis…
- 4 Jun 2020
Getting started: Getting NB-IoT Demo running on Thingy:91

user89293

The Nordic Thingy:91 is a cellular IoT prototyping platform. It is based on the nRF9160 System-in-Package (SiP). The nRF9160 has an integrated modem that supports both LTE-M and NB-IoT. The factory programmed…
- 29 May 2020
Hardware design, RF test and coverage: Using nRF9160 against R&S CMW500 (or CMW290) in signalling callbox mode

user89029

This blog clarifies what are the basic requirements when nRF9160 is used in signalling/RF testing against R&S CMW290/500 test setups. Setting up: The RF attenuations can be modified from RF settings->RF…
- 31 Mar 2020
Bluetooth low energy: Mocking CoreBluetooth

user3284

CoreBluetooth is the native iOS framework to communicate with Bluetooth-enabled Low Power (LE) devices, except iBeacons (which require CoreLocation) and HomeKit devices. It is easy to start with, if one…
- 9 Mar 2020
Getting Started : Build NCS application firmware images using Docker

user24652

How to compile a NCS application using Docker so you don't need to install dependencies directly in your system.
- 17 Feb 2020