Hi, while switching to the nRF Connect SDK, I cannot program anymore my ANNA B112 (which is a nRF52832) using my nRF52840-DK as a programmer. The following are working: Flashing and reading the program from the ANNA B112 with VS Code and SES using the new SDK Debugging the ANNA B112 with Segger Embedded Studio with the nRF 5 SDK Debugging the nRF52840-DK directly with VS Code and SES using the new SDK When I attempt to debug with the new SDK on the ANNA B112, the debugger goes to cpu_idle.S and stays there. That's with many projects, including projects that are in production now, using a ANNA B112. Thanks in advance,

Cannot debug ANNA B112 with nrf52840-DK as Jlink

Hi,

while switching to the nRF Connect SDK, I cannot program anymore my ANNA B112 (which is a nRF52832) using my nRF52840-DK as a programmer.

The following are working:

Flashing and reading the program from the ANNA B112 with VS Code and SES using the new SDK
Debugging the ANNA B112 with Segger Embedded Studio with the nRF 5 SDK
Debugging the nRF52840-DK directly with VS Code and SES using the new SDK

When I attempt to debug with the new SDK on the ANNA B112, the debugger goes to cpu_idle.S and stays there. That's with many projects, including projects that are in production now, using a ANNA B112.

Thanks in advance,

0 user91187 over 3 years ago in reply to user113175

Hi,

Following the Debug out for the nRF52840 DK you should be able to detect the BLE8 Click as an external device and program it.

As long as you have not cut SB40 you don't need to connect VDD_nRF' to VDD_nRF together with jumpers.

building a simple sample like the minimal should work on the BLE8 Click even if you build of the nrf52840 DK.

Regards,
Jonathan
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel