GPS and LTE(NBIoT) operations on the nRF9160-DK using AT commands

RE: GPS and LTE(NBIoT) operations on the nRF9160-DK using AT commands

user81181 — Fri, 27 May 2022 11:16:24 GMT

The at_client sample does not support the GNSS AT commands.

The modem core itself doesn't have any GNSS AT commands. Those commands must be implemented on the application core. This is what is done in the Serial LTE Modem (SLM) application. If you want to use GNSS via AT commands, that is the application firmware you must use.

RE: GPS and LTE(NBIoT) operations on the nRF9160-DK using AT commands

user116171 — Thu, 26 May 2022 12:18:19 GMT

Hi,

We are following suggested document but some of AT commands are not working for GNSS-related operation.

we are testing GNSS related AT command with "nrf9160dk_at_client_2022-02-17_ec486dab.hex".

Please confirm that the nRF9160 supports concurrent GPS and LTE(NBIoT) operations.

RE: GPS and LTE(NBIoT) operations on the nRF9160-DK using AT commands

user81181 — Mon, 16 May 2022 14:59:27 GMT

Hi,

Please have a look at the Serial LTE Modem sample application: https://developer.nordicsemi.com/nRF_Connect_SDK/doc/1.9.1/nrf/applications/serial_lte_modem/README.html

Best regards,

Didrik