Hi,
While testing the device firmware update through the nRFtoolbox android application, i get "device has no required service" error more frequently.
I use latest version...
I'm having some trouble successfully entering ON,IDLE mode. I have pared-down my application to do the following:
Initializes the app_timer using the scheduler:
...
I want to control GPIO toggle by PPI. Timer1 is in timer mode. CC[0] is 1000, and CC[1] is 8000.
I use compare[0] to toggle gpio18 by PPI. I also want to use compare[1] to...
Hi,
I use two evk board to connected and test the uart serialization sample(ble_s110_serialization), one is ble_app_hrs and one is ble_app_connectivity. But I have one...
I am getting get BLE_EVT_USER_MEM_REQUEST and BLE_GAP_EVT_CONN_PARAM_UPDATE event, when writing to ble device, sample code did not handle these event, and seems no document...
Hello:
Why do I erase SDK5.2 version of flash and read not, in SDK4.2 can. I tested nrf51_sdk_v5_2_0_39364\nrf51822\Board\nrf6310\flashwrite_example is a good example.However...
before i write the flash, it has been erased.so ,its value is all 0xff.
when i write 0x00 to flash address 0x0001,the value read out is not 0x00 but 0x01,and the value in...
Hi
I am working with nRF52840 DK v2.0.1, in SDK 17.0.2., trying to implement combined BLE+USB DFU in my application.
First I tried combining bootloaders from SDK (secure_bootloader...
For our application, if the device loses connection, we enter beacon mode for longer range, and advertise using extended advertising to broadcast more data. Beacon mode wit...
Hi, I send application data using Read blob PDU from nRF52832. nRF52832 firmware is connectivity of Serialization of nRF5_SDK_17.0.2 for UART interface.
After connection...
I have followed the Scheduler tutorial ( https://devzone.nordicsemi.com/guides/short-range-guides/b/software-development-kit/posts/scheduler-tutorial ) and was able to use...
Has anyone characterized the nRF5430 ADC dynamic performance such as harmonic distortion, SFDR, SNR over frequency. I am interested in the 10-2kHz frequency range.
Th...
Hi,
I just want to know is there any Pre compiled hex files are available to convert my Thingy 91 as Thingy 52, I just want to use my Thingy 91 with Thingy 52 Bluetooth...
Hello,
I am developing a custom board using NRF52820 and I am trying run the Blinky example on it with no success.
I am trying to adapt the blinky example for PCA10056_S140...
hi support team,
i searched devzone, my question are similar with "devzone.nordicsemi.com/.../349118
it is clear we can't set it manually. and there is no API to achieve...
I'm trying to build the lwm2m_client using SES through the toolchain manager. I continue to get the following error: "Error starting process C:\ncs\v1.9.0\toolchain\opt\bin...
With KPN and Deutsche Telekom LTE-M SIMs we get dual-stack APN with both IPv4 and IPv6 IPs.
But the iBasis LTE-M SIM is giving out only IPv4, ignoring any previous +CGDCONT...
Hello, I am trying to figure out an issue that is happening in my project. I am using the NRF52840 chip and I configured the WDT correctly with WDT-> CRV = 10 * 32768 (the...
Hi everyone. I want to take advertising data with ble scanner and transmit to esp32 via uart. But I don't know how to do this. Is there an example for this? I need your help...
Hi,
When building a project with nrfonnect , sdk-nrf v1.7.1 that worked for colleagues I got strange warnings:
and the building aborts.
What is very strange is that...
Hello The function scan function is being implemented with nrf52833. The desired action is an action that does not connect immediately when the scan starts, but when you receive...
Using nRF52840 and SDK15.3
I'm seeing some documentation on the DFU process and all that but I'm having to write my own bootloader transport (and lower) layer to implement...
