Hi,
While testing the device firmware update through the nRFtoolbox android application, i get "device has no required service" error more frequently.
I use latest version...
I'm having some trouble successfully entering ON,IDLE mode. I have pared-down my application to do the following:
Initializes the app_timer using the scheduler:
...
I want to control GPIO toggle by PPI. Timer1 is in timer mode. CC[0] is 1000, and CC[1] is 8000.
I use compare[0] to toggle gpio18 by PPI. I also want to use compare[1] to...
Hi,
I use two evk board to connected and test the uart serialization sample(ble_s110_serialization), one is ble_app_hrs and one is ble_app_connectivity. But I have one...
I am getting get BLE_EVT_USER_MEM_REQUEST and BLE_GAP_EVT_CONN_PARAM_UPDATE event, when writing to ble device, sample code did not handle these event, and seems no document...
Hello:
Why do I erase SDK5.2 version of flash and read not, in SDK4.2 can. I tested nrf51_sdk_v5_2_0_39364\nrf51822\Board\nrf6310\flashwrite_example is a good example.However...
before i write the flash, it has been erased.so ,its value is all 0xff.
when i write 0x00 to flash address 0x0001,the value read out is not 0x00 but 0x01,and the value in...
NCS 1.8.0
We have a custom board that uses the ATECC508A on an I2C bus. We are using release 3.3.0 of Microchips library cryptoauthlib which includes zephyr hal support...
Hi.
Does Nordic have any version of SDK with sample code for ANT bike light profile? If not, Do have any plan to add this bike light profile sample code to any SDK version...
Hello,
I have a somehow vage problem to get my PPK (first version Rev 1.0.0) up and running. I have the PPK connected to a MacBook Pro (M1) along with 2 other eval boards...
Hello, guys.
I am trying to port some existing piece of code that benefints from Nordic's SDK into Zephyr OS environment. The part of the code is using I2C bus to communicate...
Hi
I upgraded NCS from 3.6.0 to 3.9.3.Whenever I try to open the app, it keeps showing a grey screen(or white screen). If I click the SETTINGS->Updates->"Check for updates...
Hello. I am currently working on implementing a battery voltage monitoring function using nrf52840. So, when I read out the voltage value, I derive it from the following macro...
Using the Low Power node example with the light switch server example.
The LP Node successfully polls messages from the friend node.
I am struggling to figure out, WHERE...
Hi,
I am working on establishing an UART connection with Zephyr between NRF5280 and NRF9160 microcontroller (Thingy91 Prototyping board).
The standard uart_poll_out()...
Hello I am working on a nrf mesh project, in which I am using a mesh sensor example as a reference for my project. The provision is successful and configured the publish group...
I am curious if the LE Power Control feature, that was added in Bluetooth 5.2, can be enabled in the Bluetooth Controller on the nRF5340. It currently doesn't show up in the...
Good morning,
I'm playing with samples on the evaluation board and things seems pretty good Now I want to test things on the product chip and not the evaluation board...
Hello,
I use nRF52832 and SDK 17.02.
I use app_button library to detect and handle button pressing.
Everything works fine except that I have a testcase that is to...
Hello,
I'd like to download the latest MDK for SES - links here appear to go nowhere: https://www.nordicsemi.com/Products/Development-tools/nRF-MDK/Get-Started?lang=en ...
Hi，
I am doing a project with NRF52840, I can use Keil MDK to erase and download normally, but it cannot be recognized by NRFGO studio,。
I need your help。please~ Thankyou...
