Hi,
While testing the device firmware update through the nRFtoolbox android application, i get "device has no required service" error more frequently.
I use latest version...
I'm having some trouble successfully entering ON,IDLE mode. I have pared-down my application to do the following:
Initializes the app_timer using the scheduler:
...
I want to control GPIO toggle by PPI. Timer1 is in timer mode. CC[0] is 1000, and CC[1] is 8000.
I use compare[0] to toggle gpio18 by PPI. I also want to use compare[1] to...
Hi,
I use two evk board to connected and test the uart serialization sample(ble_s110_serialization), one is ble_app_hrs and one is ble_app_connectivity. But I have one...
I am getting get BLE_EVT_USER_MEM_REQUEST and BLE_GAP_EVT_CONN_PARAM_UPDATE event, when writing to ble device, sample code did not handle these event, and seems no document...
Hello:
Why do I erase SDK5.2 version of flash and read not, in SDK4.2 can. I tested nrf51_sdk_v5_2_0_39364\nrf51822\Board\nrf6310\flashwrite_example is a good example.However...
before i write the flash, it has been erased.so ,its value is all 0xff.
when i write 0x00 to flash address 0x0001,the value read out is not 0x00 but 0x01,and the value in...
Hi,
I have a nRF52840 Dongle connected up to an external j-link debugger. I have been using this over the past few weeks with no issues and unfortunately I have managed...
Hello,
We're facing an issue related to the USB IRQ.
I've 2 EVK boards NRF52833 (let's call them EVK_1 (PTX) and EVK_2 (PRX) respectively). One of them ( EVK_1 ) is connected...
Hi!
We're developing a solution where we use PC-BLE-driver JS on our central side, along with BLE dongles with nRF52840 chipsets. These dongles are pre-flashed with a connectivity...
The previous ticket was closed unexpected, https://devzone.nordicsemi.com/f/nordic-q-a/87224/how-to-remote-control-nrf52840-led-s-on-off-through-openthread-network .
Thanks...
Hi All;
i am using nRF5 SDK 17.1.2 / 17.0.1 and examples are ble_app_uart & ble_app_uart_c and nrf52833. Mode is connectable and coded phy .
I tried to connect the devices...
Hello,
Hi i am working nrf52840 DK board, from this first i have load softdevice and after that i flash the code so that time it was showing the error as "Error Flash...
Hi all,
I would like to measure water consumption at my home with nrf 51822 and send it over bluetooth.
I know there are some flow meters generating pulses, but how can...
It's early in the build so it's only building Zephyr and other low level drivers and it's erroring due to "multiple definition" of the same function name. If I search for...
Hello,
It appears as though nRF Connect does not currently support building encrypted images, so I am trying to implement it myself.
Part of creating encrypted images...
Our company has devices out in the field with Boot Loader (DFU over BLE) and application built using SDK 16.0.0 and Soft Device S132 version 6.1.1. For a variety of reasons...
Hi,
Are any of the nRF Connect SDK v1.9.1 mesh samples compatible to be run on an nRF52810 or nRF52811 chip?
If not, is there any way to make any of the samples compatible...
Hi, I use nrf52840 processor with esp32c3 as WiFi modem. I need to run OpenThread network and MQTT client on these processors. When I run only OpenThread network, it works...
Our product uses the nRF52832 SoC to periodically broadcast a beacon-like advertisement using BLE 4.x.
We use softdevice version 7.0.1 with SDK 16.0.0.
the transmit...
I'm tryin to get the USB CDC ACM Sample Application to work on my nRF52840DK board ( https://docs.zephyrproject.org/2.6.0/samples/subsys/usb/cdc_acm/README.html ).
I've...
Hello,
I am trying to use sscanf() to format an input string into an integer, followed by a string, followed by an integer. For example:
int main() { #define FORMAT_STR...
