Hi,
While testing the device firmware update through the nRFtoolbox android application, i get "device has no required service" error more frequently.
I use latest version...
I'm having some trouble successfully entering ON,IDLE mode. I have pared-down my application to do the following:
Initializes the app_timer using the scheduler:
...
I want to control GPIO toggle by PPI. Timer1 is in timer mode. CC[0] is 1000, and CC[1] is 8000.
I use compare[0] to toggle gpio18 by PPI. I also want to use compare[1] to...
Hi,
I use two evk board to connected and test the uart serialization sample(ble_s110_serialization), one is ble_app_hrs and one is ble_app_connectivity. But I have one...
I am getting get BLE_EVT_USER_MEM_REQUEST and BLE_GAP_EVT_CONN_PARAM_UPDATE event, when writing to ble device, sample code did not handle these event, and seems no document...
Hello:
Why do I erase SDK5.2 version of flash and read not, in SDK4.2 can. I tested nrf51_sdk_v5_2_0_39364\nrf51822\Board\nrf6310\flashwrite_example is a good example.However...
before i write the flash, it has been erased.so ,its value is all 0xff.
when i write 0x00 to flash address 0x0001,the value read out is not 0x00 but 0x01,and the value in...
Hi,
The ZB_ZCL_VERSION define in the file zboss_api_zcl.h have a bad value in the SDK NRF 5 v4.1.0 In the documentation, it is mentioned that :
The Nordic Zigbee software...
Hi!
I did a mesh trying to use diferent versions of a project renaming them, deleting the files inside the folder where I have my projects, putting inside other projects...
We're using nrf Device Manager for mobile to perform DFU over BLE to an nrf5340-based module with firmware built using the nrf connect 1.6.1 SDK and the out-of-the-box Zephyr...
Why there are multiple resets after post validation, firmware activation, etc in firmware update process? Can it not be handled sequentially without resets?
Hi,
We are trying ble_app_uart example for nRF51822 with nRF5 SDK v12.3 and ble_app_uart_pca10028_s130.hex file provided from hex folder works fine, but when we open IAR...
Central nRF5 device connects to peripheral NCS and initiates bonding.
The peripheral reports that security failed with error code 4 (BT_SECURITY_ERR_AUTH_REQUIREMENT) "The...
Hi all,
I am a beginner of nRF5340, trying to test AoA function for indoor positioning.
I'm wondering if there is any helpful document that goes through the whole process...
Hi there,
We are developing on the NRF5340, and have a question regarding programing. You cannot program a core, while Nordic is only powered by Vbus. When I give Vbus power...
Hi,
I have a idea but at the moment not the right approach to do it, thats why I ask here.
I want to store the current time somehow on the device so it survives a reboot...
I am working in a project where we want to be able to do full modem firmware update with FOTA for modem version 1.3.x. According to the release notes, in order to do this...
hi, i am using ncs 1.8.0 for an application where i need to send some data every 10 ms. directly sending data over NUS with bt_nus_send() from the main thread works fine....
While trying to debug some issues with my board I accidentally programmed by custom board while powering it with only 3V and now whenever I try programming it I get the following...
I want to send some data to client from server when I received data from client using server_set callback function.
Means I want to reply to client some other data then...
Hi Nordic,
I am using SDK 15.3. While I am working on a central, which connects 2 periperial devices simultaneously, I found a id_manager.c issue, protentially a bug I guess...
