Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I used to be able to see my development kit in nRFgo studio and flashed S110 onto the chip. Now all I see is: "No boards connected". I am still able to flash programs onto...
Hello,
I have an iOS application communicating with a custom device having a nordic 8001 chip.
They have established a bonded relation. In nRFgo Studio, in Security...
Hello,
In my project i am using ble_app_template example of SDK version 17.0.2 i need to send some data to device nrf52810 from the nrf mobile application. so i have tried...
Hi all,
I'm trying to connect an ESP32 with an nRF52-DK (nRF52832) through I2C. I'm using the ESP32 I2C Slave example ( https://www.arduino.cc/reference/en/libraries/esp32...
I am referring to the documentation for the UART async API when developing my application: https://docs.zephyrproject.org/latest/reference/peripherals/uart.html#uart-async...
I am having a number of problems with the nRF extension actions .
1) Pristine build does not seem to be building correctly as I have a ovelay file shown in the build section...
hello Nordic
i work with nrf52840 with zephyr 2.6.9 (ncs 1.7.1)
in ncs in zephyr/drivers/pwm/pwm_nrfx.c, in function
pwm_period_check_and_set
there is the following...
Hello,
I'm trying to achieve at least 300 kbp/s via BLE nrf5340 with Android phones (Bluetooth ver.4.2 and ver.5.x).
I use the "nRF Connect" and "Serial Bluetooth" apps...
Hello,
i am using nrf52810 and with my custom board and i want to know the tx power level of that and is it possible to change the range please let me know where to get...
1) 13dB receive gain is the gain of the Low Noise Amplifier (LNA) or the gain of the antennas on the receiver side of nRF21540 RF FEM?
2) How less noise figure 2.5dB is...
Hi.
I have received my first nRF52 device that has the new and improved APPROTECT mechanism, and I'm having a hard time disabling the protection for debugging.
I have...
Hi, we are working on an application which sends advertising data from multiple end-nodes simultaneously. At the scanner end, we want the link layer to generate a common advertising...
I'm having an error in my project where the app_error_fault_handler(...) is triggered generating an NRF_FAULT_ID_SD_ASSERT. I've overwritten the function and stored the ID...
I want to add a random delay in range 2000 to 3000 ms before my device perfrom any activity.
pls tell how can do this at earliest
usins some timer or something else
Dear Concern,
We are using nrf52840 USB dongle as one of the components in of our products. There is a chance that the device can be put inside a metal container. Right...
. I am using ble_app_beacon as a base code in that i had enabled extended advertising but i can only be able to send 198 bytes of data, if i try to send more than that led...
