Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I used to be able to see my development kit in nRFgo studio and flashed S110 onto the chip. Now all I see is: "No boards connected". I am still able to flash programs onto...
Hello,
I have an iOS application communicating with a custom device having a nordic 8001 chip.
They have established a bonded relation. In nRFgo Studio, in Security...
Hi,
The ZB_ZCL_VERSION define in the file zboss_api_zcl.h have a bad value in the SDK NRF 5 v4.1.0 In the documentation, it is mentioned that :
The Nordic Zigbee software...
Hi!
I did a mesh trying to use diferent versions of a project renaming them, deleting the files inside the folder where I have my projects, putting inside other projects...
We're using nrf Device Manager for mobile to perform DFU over BLE to an nrf5340-based module with firmware built using the nrf connect 1.6.1 SDK and the out-of-the-box Zephyr...
Why there are multiple resets after post validation, firmware activation, etc in firmware update process? Can it not be handled sequentially without resets?
Hi,
We are trying ble_app_uart example for nRF51822 with nRF5 SDK v12.3 and ble_app_uart_pca10028_s130.hex file provided from hex folder works fine, but when we open IAR...
Central nRF5 device connects to peripheral NCS and initiates bonding.
The peripheral reports that security failed with error code 4 (BT_SECURITY_ERR_AUTH_REQUIREMENT) "The...
Hi all,
I am a beginner of nRF5340, trying to test AoA function for indoor positioning.
I'm wondering if there is any helpful document that goes through the whole process...
Hi there,
We are developing on the NRF5340, and have a question regarding programing. You cannot program a core, while Nordic is only powered by Vbus. When I give Vbus power...
Hi,
I have a idea but at the moment not the right approach to do it, thats why I ask here.
I want to store the current time somehow on the device so it survives a reboot...
I am working in a project where we want to be able to do full modem firmware update with FOTA for modem version 1.3.x. According to the release notes, in order to do this...
hi, i am using ncs 1.8.0 for an application where i need to send some data every 10 ms. directly sending data over NUS with bt_nus_send() from the main thread works fine....
While trying to debug some issues with my board I accidentally programmed by custom board while powering it with only 3V and now whenever I try programming it I get the following...
I want to send some data to client from server when I received data from client using server_set callback function.
Means I want to reply to client some other data then...
Hi Nordic,
I am using SDK 15.3. While I am working on a central, which connects 2 periperial devices simultaneously, I found a id_manager.c issue, protentially a bug I guess...
