Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I used to be able to see my development kit in nRFgo studio and flashed S110 onto the chip. Now all I see is: "No boards connected". I am still able to flash programs onto...
Hello,
I have an iOS application communicating with a custom device having a nordic 8001 chip.
They have established a bonded relation. In nRFgo Studio, in Security...
I am using an iPhone Xs and trying to increase my transfer speed using the nrf connect app and a dvk-bl653 kit. I saw that my packets were only 27 bytes and I was only getting...
The nrf9160 tx power is 23DB ；
We is designing a procuct for ODM;
The size of product is small.
TRP requirements 20DB;
So the antenna designs is difficult；
Now my...
pc-nrfutil begins
#!/usr/bin/env python
Although is is not a good idea, the current beta of Mac OS does not contain /usr/bin/python.
This results in error: env:...
Hi,
I set up and testet the Low Power node example, described here:
https://infocenter.nordicsemi.com/index.jsp?topic=%2Fcom.nordic.infocenter.meshsdk.v5.0.0%2Fmd_examples_lpn_README...
Hello People!
I need to transfer large amounts of information between our custom hardware based on the nRF52832 chip (S132+SDK17), and our custom mobile app running on a...
Hi,
in the .dts file，partitions is
Can it be changed to the following?
This modification does not compile .
What should be paid attention to when modifying,...
I am trying to implement bonding in central BLE uart_app example code but I don't know how to proceed as I'm a beginner . Do we need to make any changes at peripheral side...
Hello Nordic team!
I'm following this tutorial from Nordic to do DFU OTA: https://devzone.nordicsemi.com/guides/short-range-guides/b/software-development-kit/posts/getting...
I am following this post regarding reading the static MAC address for the nRF52840: https://devzone.nordicsemi.com/f/nordic-q-a/68376/trying-to-extract-the-static-mac-address...
Hi, we have a device that reads two sensors on separate i2c buses consecutively and transmits these using ble_nus_data_send().
The i2c sensors are read on an interrupt timer...
Hello all,
I am moving from the Arduino Uno to the nRF52 DK on Segger. A big difference
When looking at the examples, I cannot see the so-called setup() method, so, I...
Dear Forum,
I have the following issue (my System: Ubuntu 20.04):
I created the secure bootloader with Softdevice S140 (v.7.2.0) for 52833 chipset, I use a 52833 Development...
I have an application based on the peripheral uart sample, using NCS 1.8.0. I need to build in a version string that is queryable, so that anyone who connects to the device...
When i intially burn the code on dk, my dk should be in system off mode ie all functionality should be off. Then i want to press a button for 5 seconds with which the device...
Hi,
I am using the nrf52840-DK with the nRF Connect SDK version 1.8.
I have modified the central_multilink sample to connect to a BLE peripheral which requires a secure...
