Hi,
I'm programming the nRF51822 and save some user data into the FLASH by using pstorage_update . It works fine if I set system off mode, and wake it up. I can read back...
I'm looking at interfacing a typical Wheatstone bridge sensor to the nRF51822 ADC. This particular sensor only requires a mA or two for excitation and the output fits within...
I am using s110 and nrf51822. I've set up up a long characteristic of 154 bytes.
Sending between 1 and 154 bytes works as expected.
Sending 155 - 160 bytes gets rejected...
Hi,
I tested the nrf beacon application, it allows only the beacons with company identifier 0x0059 (nordic's id). But i need to modify it to support all the device, how...
I use a app_timer_create() function to create a task(200ms once)
when in the task_timeout_handle() ,
I do something more than 200ms,
what will this timer going ?
Hi!
I use nrf51-pwm-library ( github.com/.../) to control brightness of LED RGB light source and it works ok till I don't want to adjust brightness slowly (dimming function...
hello,
are there any completed sample code of using pwm0, 1?
just 2 or 3 word can working like following? or need other config?
pwmcon=xx;
pwmdc0=xx;
pwmdc1=xx;
also...
Hello,
In my project i am using ble_app_template example of SDK version 17.0.2 i need to send some data to device nrf52810 from the nrf mobile application. so i have tried...
Hi all,
I'm trying to connect an ESP32 with an nRF52-DK (nRF52832) through I2C. I'm using the ESP32 I2C Slave example ( https://www.arduino.cc/reference/en/libraries/esp32...
I am referring to the documentation for the UART async API when developing my application: https://docs.zephyrproject.org/latest/reference/peripherals/uart.html#uart-async...
I am having a number of problems with the nRF extension actions .
1) Pristine build does not seem to be building correctly as I have a ovelay file shown in the build section...
hello Nordic
i work with nrf52840 with zephyr 2.6.9 (ncs 1.7.1)
in ncs in zephyr/drivers/pwm/pwm_nrfx.c, in function
pwm_period_check_and_set
there is the following...
Hello,
I'm trying to achieve at least 300 kbp/s via BLE nrf5340 with Android phones (Bluetooth ver.4.2 and ver.5.x).
I use the "nRF Connect" and "Serial Bluetooth" apps...
Hello,
i am using nrf52810 and with my custom board and i want to know the tx power level of that and is it possible to change the range please let me know where to get...
1) 13dB receive gain is the gain of the Low Noise Amplifier (LNA) or the gain of the antennas on the receiver side of nRF21540 RF FEM?
2) How less noise figure 2.5dB is...
Hi.
I have received my first nRF52 device that has the new and improved APPROTECT mechanism, and I'm having a hard time disabling the protection for debugging.
I have...
Hi, we are working on an application which sends advertising data from multiple end-nodes simultaneously. At the scanner end, we want the link layer to generate a common advertising...
I'm having an error in my project where the app_error_fault_handler(...) is triggered generating an NRF_FAULT_ID_SD_ASSERT. I've overwritten the function and stored the ID...
I want to add a random delay in range 2000 to 3000 ms before my device perfrom any activity.
pls tell how can do this at earliest
usins some timer or something else
Dear Concern,
We are using nrf52840 USB dongle as one of the components in of our products. There is a chance that the device can be put inside a metal container. Right...
. I am using ble_app_beacon as a base code in that i had enabled extended advertising but i can only be able to send 198 bytes of data, if i try to send more than that led...
