Software Development Kit - All Comments

RE: nRF5 SDK Application Timer Tutorial

user113599 — Wed, 15 Jun 2022 10:17:08 GMT

Looking to implement "one shot timer" , however, not sure does it work on the SDK 17.1.0 , because it explicitly points to the 15.2 ?

RE: nRF5 SDK Application Timer Tutorial

user101087 — Wed, 18 May 2022 08:56:15 GMT

Nice Tutorial !

RE: nRF5 SDK v17.1.0 Secure DFU Hands-on Tutorial

user108796 — Wed, 20 Apr 2022 06:23:56 GMT

Thanks for the post. Very interesting. I'm particularly interested in the last paragraph. What would be the preferred way of dealing with a broken app updated thru OTA? How would it be best to trigger the DFU? I would be thankful for any pointers to resources that could be useful.

RE: Setting up the Timeslot API

user91008 — Tue, 19 Apr 2022 09:40:33 GMT

Dear ALL

If your timeslot does not work on the SDK after version 15.0, you can refer to the practices of Gurusanthosh and sudu, and also see this discussion:

devzone.nordicsemi.com/.../timeslot-question

RE: Board support package (BSP)

user104149 — Mon, 11 Apr 2022 08:02:00 GMT

I think this tutorial is not good:
- the URLs are still not working
- with my SDK (17.0.2) bsp_init(x,x) has two arguments, not three
- there is almost no documentation on the hardware side of these "LEDs" and "buttons"

RE: Board support package (BSP)

user104149 — Mon, 11 Apr 2022 07:59:43 GMT

I think this tutorial is not good:

RE: nRF5 SDK Application Timer Tutorial

user91908 — Fri, 04 Feb 2022 09:18:19 GMT

Do you have state machine example with this timer ? thanks

RE: Migrating to Peer Manager

user98446 — Thu, 06 Jan 2022 09:13:10 GMT

SDK15.3，设备默认可以配对多少部手机？如果满了会被覆盖吗？仍然返回配对失败。

RE: Migrating to Peer Manager

user28192 — Fri, 12 Nov 2021 12:41:21 GMT

Hello,
I'm witrh SDK 17.0.2 and softdevice S140, following this guide give error about the nrf_ble_lesc file, altough is included into the project is not referred, wjat are the settings to do inside the sdk_config.h to get it working? Open the file into the SES editor give all the code grayed out as the #if NRF_MODULE_ENABLED(NRF_BLE_LESC) was not satisfied but inside the sdk_config.h file there is no trace about NRF_BLE_LESC key, I've only PM_LESC_ENABLED set to 1.
Scanning all the SDK files for the NRF_BLE_LESC label give no entry so what have to do now?

RE: Getting started with Nordic's Secure DFU bootloader, a step by step guide

user90259 — Tue, 06 Jul 2021 02:52:37 GMT

Hi nordic,

I want dfu the BL only, how should I pack file?

Thanks and best regards!

John

RE: nRF5 SDK Application Timer Tutorial

user104333 — Thu, 13 May 2021 10:26:56 GMT

Hi, I'm trying to run the code on Debug mode insted of Release mode but i get an assert on line 378 on main code. all code and library are original and i'm using sdk15.2.0 with nRF52832 dk. Am i doing something wrong?

RE: Getting started with Nordic's Secure DFU bootloader, a step by step guide

user80315 — Tue, 09 Feb 2021 22:38:49 GMT

In B3, it says "Click Build" to build the bootloader. Is it in Keil? Since I'm not using Keil, what other ways can I use to build the bootloader?

RE: Radio Notification

user75889 — Sun, 03 Jan 2021 13:37:34 GMT

Hello,
I used this in an application that is both advertising and scanning, and I seem to get events from both.
what I'm looking for is to get events only when i have an advertising burst.
since I use both scan and advertising then I understand that some of the advertising events will be disabled and so I want to count them.
I am using SDK v17.0.2 with nrf52840, is that possible?
thanks.

RE: nRF5 SDK Scheduler Tutorial

user56525 — Thu, 17 Sep 2020 12:10:24 GMT

I am wondering, by which value I need to extend the scheduler event queue event data size i.e. SCHED_MAX_EVENT_DATA_SIZE, when using SoftDevice handler library? Maybe += sizeof(ble_evt_t)? Or is this handled internally?

RE: Migrating to Peer Manager

user92189 — Wed, 26 Aug 2020 18:19:06 GMT

I am not seeing fstorage.h anywhere in my SDK. I am on version 17. I do see:

nrf_fstorage.h