Nordic DevZone

In SDK v8.1 we added the TWI driver (nrf_drv_twi.c). Unfortunately the nrf_drv_config.h file wasn't updated correctly with the new driver. The symptom is the error with "TWI_COUNT is missing". Here…

If you are looking for a place to get started with DFU, please have a look at this presentation here and the tutorial here. In this post, we cover some in depth Q&A topics regarding Device Firmware…

One way to program the nRF51822 Bluetooth Smart Beacon Kit is to use the nRF51 DK. This gives you a full scale development platform (the nRF51 DK). This blog will go thru the steps needed to program…

2020-08-04: The content of this guide is now covered in the documentation on Infocenter. For the most up-to-date Getting started guide with nRF9160 DK please follow this link.  2020-03-09: Updated tutorial to…

Inside every nRF9160 DK there is a eSIM from iBasis. Below is a FAQ related to iBasis global access for things. (Updated on November, 2020) eSIM Provisioning and Network Selection Logic Q. What is an…

The scope of this tutorial is to make it clear how a developer can adjust the RAM and FLASH memory start addresses. The examples demonstrated in this tutorial uses SDK 15.2 The first three Sections explains…

This tutorial demonstrates how to adapt and program SDK example applications to the nRF52840 dongle using USB DFU. It also describes how to program the dongle via Serial Wire Debug (SWD) using an external…

We are happy to announce our first release of the nRF Connect for Cloud Device API! Connect your BLE, LTE/NB-IoT or any other device to our free IoT development platform and interact with that device through…

This is a follow-up to my previous blog post; adding custom commands to a BLE example. I hope it was interesting to see an example of adding the vendor specific Nordic UART service (NUS) into another…