This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

nrf52805 and com with PUTTY

Hello, i have send my program with my DKnr52840 on my module 805, (the example peripheral Uart) now i would like to make my com with putty or other software but i'm going to show you what i have.i verified the com and when im on my app on my phone and im trying to write something i have nothing on the screen. i think there is no communication. Thank you in advance

Top Replies

user75734 over 4 years ago in reply to user111471 +1 verified

I see that you've opened a new case with this subject, and it Torbjørn will take it from here. It's a better idea to keep each ticket to one subject, and since we have solved the nRF52805 communication…

Parents

0 user75734 over 4 years ago

The nRF52805 module will need to connect to the computer somehow. The DK is connected over a micro-USB to USB and UART bridge in order to print data to and from PuTTY. Most modules don't have a USB to UART bridge, but you can connect one. In the uart_init() function, the TX and RX pin are set by rx_pin_no and tx_pin_no.

Best regards,

Simon
Cancel
Vote Up 0 Vote Down

Cancel
0 user111471 over 4 years ago in reply to user75734

hello , sorry for being late. I just checked my micro USB and USB and its okay. Do I have something to modify in my program to putty being connected? Because I'm not having connection ( the connection/ com with putty was working with my DK but not the module. thx in advance
Cancel
Vote Up 0 Vote Down

Cancel
0 user111471 over 4 years ago in reply to user111471

im giving the main file too so you can have the info that you asked for
Cancel
Vote Up 0 Vote Down

Cancel
0 user111471 over 4 years ago in reply to user111471

Hello Simon i have close the other post because my only problem now is putty.
Cancel
Vote Up 0 Vote Down

Cancel
0 user111471 over 4 years ago in reply to user111471

Hello, everything is working fine when i send the program in the DK but when I emluated/transfer this in the nrf52805 (module) I can send it but I can't send or receive info thx to the app ou putty. I saw the program but I wanted to know if you have an idea of the source of the problem. the dk has value and feedback and the nrf805 nothing communicate. Thank you in advance
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 user111471 over 4 years ago in reply to user111471

Hello, everything is working fine when i send the program in the DK but when I emluated/transfer this in the nrf52805 (module) I can send it but I can't send or receive info thx to the app ou putty. I saw the program but I wanted to know if you have an idea of the source of the problem. the dk has value and feedback and the nrf805 nothing communicate. Thank you in advance
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data