Timestamp Data in nRF5340

Hi Karthik

There's a description of how to do something like that here.

Essentially you can use the k_cycle_get_32() to get an accurate timestamp from Zephyr, and if you divide this number by 32768 (the freq. of the LF clock) you will get the number of seconds passed. Then you need to implement this as part of the data you transmit over BLE. Likely in a service.

Best regards,

Simon

Hi Simonr,

Thank you for the response.

I followed the function you suggested me. But not able to print the time.

Hi 

If you want to do the time stamps on the peripheral, and send that as part of the BLE data, you will need to make it transmit the data as part of its advertising data, or part of a service if you're in a connection. You can take a look at the Bluetooth:Peripheral CTS client that lets you print the current time for example. Even though you don't want to use that service specifically, it should give you an idea of how to send the timestamp data over BLE.

Best regards,

Simon

Thank You Will Try with this.