Zigbee ZCL read attributes command always times-out without any response.

Hi,

What device are you sending the zcl attr read command to, and what cluster and attribute?

Are you able to get a sniffer log of this? If you have an additional nRF52840 Dongle or DK you can use our nRF Sniffer for 802.15.4. Please start the sniffer before the network is started, so the sniffer has the network key.

Best regards,

Marte

Hi, Marte:

My Wireshark capture looks the same as yours, i.e. I can see broadcast and response packets.  How did you manage to display the specific Zigbee ZCL details of each packet?  Did you use Wireshark?

Best regards,

Jody

Hi, Marte:

I get the same error, "Unable to configure attribute 0 reporting. Status: 141".

Best regards,

Jody

Hi Jody,

Can you show me what the command you are sending looks like? Are you able to get a sniffer log of this that you can upload here for me to look at?

Best regards,

Marte

Hi, Marte:

Here's my command window:

uart:~$ bdb start
Started router
Done
[00:00:11.535,461] <inf> zigbee_app_utils: Production configuration is not present or invalid (status: -1)
[00:00:11.536,193] <inf> zigbee_app_utils: Zigbee stack initialized
[00:00:11.572,082] <inf> zigbee_app_utils: Unimplemented signal (signal: 54, status: 0)
[00:00:11.576,141] <inf> app: Start network steering
[00:00:12.049,743] <inf> zigbee_app_utils: Unimplemented signal (signal: 54, status: 0)
[00:00:12.053,192] <inf> app: Network steering started
[00:01:00.393,127] <inf> zigbee_app_utils: Device authorization event received (short: 0x3e2d, long: 001788010b6dec20, authorization type: 1, authorization status: 0)
[00:01:04.344,482] <inf> app: New device commissioned or rejoined (short: 0x3e2d)
[00:01:04.344,543] <inf> app: Joining period extended.
[00:01:10.199,310] <inf> zigbee_app_utils: Unimplemented signal (signal: 50, status: 0)
[00:03:14.206,390] <inf> zigbee_app_utils: Unimplemented signal (signal: 54, status: 0)
[00:04:06.627,136] <inf> app: Network steering finished
uart:~$ zcl cmd 3e2d 11 0x0300 0x00 -l a9000000
Done
uart:~$ zcl cmd 3e2d 11 0x0300 0x00 -l 64000000
Done
uart:~$ zcl cmd 3e2d 11 0x0006 0x02
Done
uart:~$ zcl subscribe on 3e2d 11 0x0300 0x0104 0x00 20 2 5
Error: Unable to configure attribute 0 reporting. Status: 141

Error: One or more attributes reporting were not configured successfully[00:08:16.009,094] <inf> zigbee.eprxzcl: Received ZCL command (0): src_addr=0x3e2d(sho~
uart:~$

And here's my Wireshark capture.

Best regards,

Jody

Hi Jody,

The packets in the sniffer are encrypted. Do you have the network key so that I can decrypt the packets? If not, can you capture a sniffer log where you start the sniffer before the coordinator starts the network so that the sniffer has the network key?

Best regards,

Marte

Hi, Marte:

Actually, I did start the sniffer before the coordinator and I've never been able to capture the network key,  Is there a way that I can get the network key from the coordinator?

Best regards,

Jody

Hi, Marte:

Actually, I did start the sniffer before the coordinator and I've never been able to capture the network key,  Is there a way that I can get the network key from the coordinator?

Best regards,

Jody