BLE advertising events

Hi,

You can trigger the SAADC sampling from the Radio Notification end signal if you don't want the sampling to overlap with RADIO activity during advertisements.

Regards,

Vidar

Hi,

You can trigger the SAADC sampling from the Radio Notification end signal if you don't want the sampling to overlap with RADIO activity during advertisements.

Regards,

Vidar

Hi,

I am using external ADC and BLE  advertising interval is 500 ms and i want to stop sampling during this period how to use radio notification in my application.

Regards,

saravana

Hi,

Here is a snippet showing how you can use the radio notification API:

/*ISR triggered after protocol event end */

void RADIO_NOTIFICATION_IRQHandler()
{   
    //TODO: Perform a single SAADC sample
}

/* This function should be called right after ble_stack_init() */
static void radio_notification_enable()
{
    uint32_t err_code;

    err_code = sd_nvic_ClearPendingIRQ(RADIO_NOTIFICATION_IRQn);
    APP_ERROR_CHECK(err_code);

    err_code = sd_nvic_EnableIRQ(RADIO_NOTIFICATION_IRQn);
    APP_ERROR_CHECK(err_code);

    err_code = sd_radio_notification_cfg_set(NRF_RADIO_NOTIFICATION_TYPE_INT_ON_INACTIVE,
                                             NRF_RADIO_NOTIFICATION_DISTANCE_NONE);
    APP_ERROR_CHECK(err_code);
}

Regards,

Vidar

Hi,

As per the below diagram, i will get notification before and after radio activity in handler so, i won't be notified during the radio activity. in that case how can the samples be ignored during this radio activity .

Correct me if i am wrong.

Regards,

Saravana 

Exactly how to ignore those samples is dependent on how you are currently using the SAADC driver in your code. How frequent will you need to  need to sample the voltage in your app?

O.3ms is the sampling period and advertisement happens every 500ms