BLE Communication between two nrf5340

Hi, 

You can start from 

• Bluetooth: Central UART
• Bluetooth: Peripheral UART

Regards,
Amanda

Hi Amanda

thank you very much for the tips.

While testing those samples, I can't get any output, that the Kits are connected. I only get a message "Starting Bluetooth Central UART example" in NRF TERMINAL, but nothing else. On the Kit with the Peripheral sample on it indicates the LED 2 that the Kit is connected, but in NRF TERMINAL is also only the "Starting Nordic UART service example" message. I also connected PuTTy to the Central, but I don!'t get any message here. I did not change anything in the Samples so far.

Could you please give me an advice, what should I do?

Regards, Jirik

Hi, 

In the UART samples, the UART console is used to send and read data over the NUS service. Debug messages are not displayed in this UART console. Instead, they are printed by the RTT logger. If you want to view the debug messages, follow the procedure in Connecting using RTT. Once you connect via RTT, you can the event logs. 

-Amanda

Hi, 

In the UART samples, the UART console is used to send and read data over the NUS service. Debug messages are not displayed in this UART console. Instead, they are printed by the RTT logger. If you want to view the debug messages, follow the procedure in Connecting using RTT. Once you connect via RTT, you can the event logs. 

-Amanda

Hi Amanda

Thank you very much for tips, I think I understood the connecting and the communication between the Central and Peripheral. Now I have problems with getting the data from the temperature sensors to the UART sending buffer. I get the temperature data with SPI interface as uint32_t.

Would you have some advice for me?

Jiri

Hi, 

Take a look at the ble_write_thread function and this tutorial. 

-Amanda

Hi Amanda

thank you for advice. I have still problems with the received data. 

This is how is changed the ble_write_thread, I just added array number and variable length, and I'm increasing the number everz second and send it to the central.

uint8_t number[1];
uint16_t length;

void ble_write_thread(void)
{
	/* Don't go any further until BLE is initialized */
	k_sem_take(&ble_init_ok, K_FOREVER);
	length = sizeof(number);
	number[0] = 0b0000001;
	for (;;) {
		if (bt_nus_send(NULL, number, length)) {
			LOG_WRN("Failed to send data over BLE connection");
		}
		number[0] ++;
		length = sizeof(number);
		k_msleep(1000);
		printk("number %x\t length %x\n", number[0], length);
	}
}

The output in PuTTy of the peripheral looks like this: 

Starting Nordic UART service example

number 2         length 1

number 3         length 1

number 4         length 1

number 5         length 1

When I do no changes to the central, the UART outputs in PuTTy are characters, which I do not need, I need the numbers, so I made following change.

static uint8_t ble_data_received(struct bt_nus_client *nus,
						uint8_t *data, uint16_t len)
{
	ARG_UNUSED(nus);

	printk("%x\n", &data);
	
	return BT_GATT_ITER_CONTINUE;
}

In the central I just let the received data print to console like this (without sending it to UART).

But now I don't get the data I send, I get something like this: 

20003b94

20003b94

20003b94

20003b94

20003b94

20003b94

20003b94

20003b94

Some data, I don't understand, and every time same. How is it possible?

I think in the central I work with wrong data, but I can't find the right.

I also tried another sample, peripheral_hr and central_hr, I think this programm does the same thing as I tried, the peripheral sends every second increased number, and the central should receive it and print it, but it prints every time the same number.

PuTTy - Peripheral

Heartrate 141

Heartrate 142

Heartrate 143

Heartrate 144

Heartrate 145

Heartrate 146

Heartrate 147

Heartrate 148

Heartrate 149

PuTTy - Central

[NOTIFICATION] data 20005dc0 length 2

[NOTIFICATION] data 20005dc0 length 2

[NOTIFICATION] data 20005dc0 length 2

[NOTIFICATION] data 20005dc0 length 2

[NOTIFICATION] data 20005dc0 length 2

[NOTIFICATION] data 20005dc0 length 2

[NOTIFICATION] data 20005dc0 length 2

[NOTIFICATION] data 20005dc0 length 2

[NOTIFICATION] data 20005dc0 length 2

I think it must be some other parameter read.

Could you please give me an advice, how do I get to the data, I actually wanted to send?

Jiri