Hello,
we are currently planning to outfit yet another product with our firmware to make it connectable with our BlueRange mesh ecosystem. Now, I wanted to ask if someone could point me to a fully certified nRf52840 module in an enclosure with an external cable connector.
We were originally planning to use a USB Dongle but will probably have to go with a simple UART connection. Basically all we need is a ready made hardware module in an enclosure with a cable or external connector that would allow us to have VCC, GND and two UART lines that the customer can plug into the existing hardware by using a wire that we will prepare for them.
There are a number of beacon solutions, but we do not want to modify the enclosures and e.g. solder a cable.
Happy for all recommendations 
️
Marius
