I have succeeded in running the Multi-NUS package on the nRF52840DK. My client's client learned of the nRF21540EK and wants to try using it to extend the range in the present application. Is there an equivalent of the Multi-NUS package available for this board? Fallback would be an NUS application whereby i could gather the routines to access the control lines for the 21540 and merge it with the Multi-NUS software.
One other minor nit where it doesn't follow Windows standard: When the window has the focus, there should be some indication such as a change of title bar color or a highlighted border. Hard to know that I'm going to get the right screen when I captured the screen below.
My screen looks exactly like yours, except that my toolchain is installed (automatically) in a different location, and I have the project open as well.
If you have used the Toolchain manager to install the SDK, then the only path that matters is the path to the toolchain folder as I showed earlier.
If you have set it right, and removed your old build folder, then it should show up all the boards
If it doesn't, then your toolchain is not properly installed. I did not see that behavior myself before. So if the problem persists, you can attach your project here and I can try to resolve the dependencies.
If you have used the Toolchain manager to install the SDK, then the only path that matters is the path to the toolchain folder as I showed earlier.
If you have set it right, and removed your old build folder, then it should show up all the boards
If it doesn't, then your toolchain is not properly installed. I did not see that behavior myself before. So if the problem persists, you can attach your project here and I can try to resolve the dependencies.
