Hi All,
I'm using nRF9160dk (v1.1.0) and install nRF connect for desktop and trying get GPS coordinates. I wanted to know is it possible to get GPS data without inserting SIM card? If yes How? & what are step need to follow?
Thank in Advance.
Hi All,
I'm using nRF9160dk (v1.1.0) and install nRF connect for desktop and trying get GPS coordinates. I wanted to know is it possible to get GPS data without inserting SIM card? If yes How? & what are step need to follow?
Thank in Advance.
Hi,
Yes, you can get only the GPS data without using a SIM card. We have the GPS/GNSS sample.
Here is the sample: https://github.com/nrfconnect/sdk-nrf/tree/v1.9.1/samples/nrf9160/gnss
Here is the docs: https://developer.nordicsemi.com/nRF_Connect_SDK/doc/1.9.1/nrf/samples/nrf9160/gnss/README.html#nrf9160-gnss
Regards,
Jonathan
Hi Jonathan,
I just get board few days ago, and i don't have any experience with nRF board so 1st time i build and flash Hello_Wold program and getting output on LTE link monito. Now want to get GPS coordinate without insert SIM card so as you said i build and flash sample program and seeing output on LTE link monitor, it's showing
not getting GPS coordinate, please help for getting it.
thanks & Regards
S
achin
You need to be outside with a clear view of the sky, GPS does not work inside.
Regards,
Jonathan
Hi Jonathan,
If i buy and attached external antenna for nRF9160DK (v1.1.0), will i get better signal? so can i use it in indoor. if yes, let me know from where i can buy it.
SachinGupta said:If i buy and attached external antenna for nRF9160DK (v1.1.0), will i get better signal?
Yes
SachinGupta said:so can i use it in indoor.
No
GPS generally does not work inside due to the fact that the GNSS signals don't penetrate buildings very well. So if you are a somewhere where there are many tall buildings then expect results to be bad on ground level. If you place the antenna on the rooftop then you should be able to get a GPS fix.
Regards,
Jonathan
Hi Support,
i did some changes(add some folder ) in gps sample program for nRF9160DK(v1.1.0) and using nRF SDK connect , toolchain 1.7.1, and getting error (error: Aborting due to Kconfig warnings) while building, that are below:-
Loaded configuration 'C:/Users/skanchan/ncs/v1.7.1/zephyr/boards/arm/nrf9160dk_nrf9160/nrf9160dk_nrf9160_ns_defconfig'
Merged configuration 'C:/lab_ZIPPY/prj.conf'
warning: NET_SOCKETS_POSIX_NAMES (defined at c:\lab_ZIPPY\build\subsys\net\lib\sockets\Kconfig:13) was assigned the
value 'y' but got the value 'n'. Check these unsatisfied dependencies: (!POSIX_API) (=n). See
http://docs.zephyrproject.org/latest/reference/kconfig/CONFIG_NET_SOCKETS_POSIX_NAMES.html and/or
look up NET_SOCKETS_POSIX_NAMES in the menuconfig/guiconfig interface. The Application Development
Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual
might be helpful too.
warning: the hex symbol NRF_MODEM_LIB_SHMEM_CTRL_SIZE (defined at C:\Users\skanchan\ncs\v1.7.1\nrf\lib\nrf_modem_lib\Kconfig:105) has a non-hex default NRF_MODEM_SHMEM_CTRL_SIZE (undefined)
warning: <choice MEMFAULT_HTTP_PERIODIC_UPLOAD_CONTEXT> (defined at C:\Users\skanchan\ncs\v1.7.1\nrf\modules\memfault\Kconfig:167) defined with type unknown
warning: <choice MEMFAULT_HTTP_PERIODIC_UPLOAD_CONTEXT> (defined at C:\Users\skanchan\ncs\v1.7.1\nrf\modules\memfault\Kconfig:167) defined without a prompt
warning: the default selection MEMFAULT_HTTP_PERIODIC_UPLOAD_USE_DEDICATED_WORKQUEUE (undefined) of <choice MEMFAULT_HTTP_PERIODIC_UPLOAD_CONTEXT> (defined at C:\Users\skanchan\ncs\v1.7.1\nrf\modules\memfault\Kconfig:167) is not contained in the choice
warning: HAS_NRFX (defined at c:\lab_ZIPPY\build\modules\hal_nordic\nrfx\Kconfig:4) has direct dependencies 0 with value n, but is currently being y-selected by the following symbols:
- SOC_SERIES_NRF91X (defined at c:\lab_ZIPPY\build\soc\arm\nordic_nrf\nrf91\Kconfig.series:6), with value y, direct dependencies <choice> (value: y), and select condition <choice> (value: y)
warning: NRFX_CLOCK (defined at c:\lab_ZIPPY\build\modules\hal_nordic\nrfx\Kconfig:14) has direct dependencies HAS_HW_NRF_CLOCK && HAS_NRFX && 0 with value n, but is currently being y-selected by the following symbols:
- CLOCK_CONTROL_NRF (defined at c:\lab_ZIPPY\build\drivers\clock_control\Kconfig.nrf:13), with value y, direct dependencies SOC_COMPATIBLE_NRF && CLOCK_CONTROL (value: y), and select condition !CLOCK_CONTROL_NRF_FORCE_ALT && SOC_COMPATIBLE_NRF && CLOCK_CONTROL (value: y)
warning: NRFX_CLOCK_LFXO_TWO_STAGE_ENABLED (defined at c:\lab_ZIPPY\build\modules\hal_nordic\nrfx\Kconfig:18) has direct dependencies NRFX_CLOCK && HAS_NRFX && 0 with value n, but is currently being y-selected by the following symbols:
- CLOCK_CONTROL_NRF_K32SRC_XTAL (defined at c:\lab_ZIPPY\build\drivers\clock_control\Kconfig.nrf:36), with value y, direct dependencies <choice CLOCK_CONTROL_NRF_SOURCE> (value: y), and select condition !SOC_SERIES_BSIM_NRFXX && !CLOCK_CONTROL_NRF_FORCE_ALT && <choice CLOCK_CONTROL_NRF_SOURCE> (value: y)
warning: NRFX_DPPI (defined at c:\lab_ZIPPY\build\modules\hal_nordic\nrfx\Kconfig:26, c:\lab_ZIPPY\build\drivers\serial\Kconfig.nrfx:375) has direct dependencies (HAS_HW_NRF_DPPIC && HAS_NRFX && 0) || (HAS_HW_NRF_DPPIC && (UART_0_NRF_HW_ASYNC || UART_1_NRF_HW_ASYNC || UART_2_NRF_HW_ASYNC || UART_3_NRF_HW_ASYNC) && UART_NRFX && SERIAL) with value n, but is currently being y-selected by the following symbols:
- UART_ENHANCED_POLL_OUT (defined at c:\lab_ZIPPY\build\drivers\serial\Kconfig.nrfx:388), with value y, direct dependencies (UART_0_ENHANCED_POLL_OUT || UART_1_ENHANCED_POLL_OUT || UART_2_ENHANCED_POLL_OUT || UART_3_ENHANCED_POLL_OUT) && UART_NRFX && SERIAL (value: y), and select condition HAS_HW_NRF_DPPIC && (UART_0_ENHANCED_POLL_OUT || UART_1_ENHANCED_POLL_OUT || UART_2_ENHANCED_POLL_OUT || UART_3_ENHANCED_POLL_OUT) && UART_NRFX && SERIAL (value: y)
warning: NRFX_GPIOTE (defined at c:\lab_ZIPPY\build\modules\hal_nordic\nrfx\Kconfig:65) has direct dependencies HAS_HW_NRF_GPIOTE && HAS_NRFX && 0 with value n, but is currently being y-selected by the following symbols:
- GPIO_NRFX (defined at c:\lab_ZIPPY\build\drivers\gpio\Kconfig.nrfx:4), with value y, direct dependencies SOC_FAMILY_NRF && GPIO (value: y), and select condition SOC_FAMILY_NRF && GPIO (value: y)
error: Aborting due to Kconfig warnings
CMake Error at C:\Users\skanchan\ncs\v1.7.1\zephyr\cmake\kconfig.cmake:268 (message):
command failed with return code: 1
Call Stack (most recent call first):
C:\Users\skanchan\ncs\v1.7.1\zephyr\cmake\app\boilerplate.cmake:554 (include)
C:\Users\skanchan\ncs\v1.7.1\zephyr\share\zephyr-package\cmake\ZephyrConfig.cmake:24 (include)
C:\Users\skanchan\ncs\v1.7.1\zephyr\share\zephyr-package\cmake\ZephyrConfig.cmake:35 (include_boilerplate)
c:\lab_ZIPPY\build\CMakeLists.txt:9 (find_package)
-- Configuring incomplete, errors occurred!
FATAL ERROR: command exited with status 1: 'c:\Users\skanchan\ncs\v1.7.1\toolchain\opt\bin\cmake.EXE' '-DWEST_PYTHON=c:\Users\skanchan\ncs\v1.7.1\toolchain\opt\bin\python.exe' '-Bc:\lab_ZIPPY\build' '-Sc:\lab_ZIPPY' -GNinja -DBOARD=nrf9160dk_nrf9160_ns -DNCS_TOOLCHAIN_VERSION:STRING=NONECompose
Hi,
Can you create a new ticket here on Devzone with the new question and all relevant info. I believe the original questions has been answered in this ticket.
Regards,
Jonathan
Hi,
Can you create a new ticket here on Devzone with the new question and all relevant info. I believe the original questions has been answered in this ticket.
Regards,
Jonathan