• State Verified Answer
  • Locked Locked
  • Replies 4 replies
  • Subscribers 25 subscribers
  • Views 145 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 289958
Options
nRF5 SDK is not maintained anymore
More Info: Consider nRF Connect SDK for new designs
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

nRF52840 DK - Zephyr Project with VS - Blinky Project Failure

user81875

Hi All,

I have a nRF52840 DK board. Which I bought about 1.5 years ago. I used to do some development using Segger Embedded Studio those days.

Now I have setup the Zephyr Project in the Visual Studio environment. I started with the Blinky project. I built it and flashed it to the board. 

However, the LED1 did not start blinking. 

I noticed that when I short the bridge SB9, the LED1 starts to blink. 

I am not sure whether there is an issue with my project configuration or some hardware issue.

Hope anyone can help me with this.

Thanks a lot!!

Related
Terms of service