I would like to set the radio channel using 'uint32_t nrf_esb_set_rf_channel ( uint32_t channel ) '.
In 'nRF52840 Product Specification v1.7', '6.20.12.2 Operating frequencies', 'Table 88', it states 'The IEEE 802.15.4 standard defines 16 channels [11 - 26] of 5 MHz each in the 2450 MHz frequency band. The FREQUENCY register of the radio module must be programmed according to the table below for correct operation on the centre frequency defined for each channel.'
However, this is written as an example for IEEE 802.15.4 and I am using ESB.
Can I configure the ESB as per 'Table 88'?
Translated with www.DeepL.com/Translator (free version)
