set tx power level in nrf52810

Hello,

You can change they TX power level by using the sd_ble_gap_tx_power_set function. The valid TX power level configuration for the nRF52810 can be seen in its RADIO TXPOWER register documentation.

Best regards,
Karl

Hello ,

thanks for the reply Karl, actually i am using ble_app_template example for advertising the sensor data for connectable beacon since here i have used this function already but i don't think so the value has changed. so for more details please check my code . here the cod

at the starting i have added below line,

static uint8_t  m_adv_handle = BLE_GAP_ADV_SET_HANDLE_NOT_SET;


after this in advertising_init function i made this changes,

static void advertising_init(void)
{
    ret_code_t             err_code;
    ble_advertising_init_t init;

    memset(&init, 0, sizeof(init));

    int8_t tx_power_level = -40;
    sd_ble_gap_tx_power_set(BLE_GAP_TX_POWER_ROLE_ADV,m_adv_handle,tx_power_level);


    init.advdata.name_type               = BLE_ADVDATA_FULL_NAME;
    init.advdata.include_appearance      = true;
    init.advdata.flags                   = BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE;
    init.advdata.uuids_complete.uuid_cnt = sizeof(m_adv_uuids) / sizeof(m_adv_uuids[0]);
    init.advdata.uuids_complete.p_uuids  = m_adv_uuids;

    init.config.ble_adv_fast_enabled  = true;
    init.config.ble_adv_fast_interval = APP_ADV_INTERVAL;
    init.config.ble_adv_fast_timeout  = APP_ADV_DURATION;

    init.evt_handler = on_adv_evt;

    err_code = ble_advertising_init(&m_advertising, &init);
    APP_ERROR_CHECK(err_code);

    ble_advertising_conn_cfg_tag_set(&m_advertising, APP_BLE_CONN_CFG_TAG);
}

Which backend are you using for your logger, RTT?
I am not seeing any error message in your Debug Terminal window - do you have a separate RTT terminal application where the messages are routed?

Best regards,
Karl

Hello ,

mr.karl sorry for the late reply, now i got the exact error and the please find the below attachment for more details.

thank you.

Hello again,

No need to apologize, it is no problem at all!

It looks like the SoftDevice is rejecting the advertising handle you have passed it. Could you verify that the advertising handle is the correct one?

Best regards,
Karl

Hello,

Actually i have used the advertising handle directly so i don't have much idea on that. In my code i declared it as first ,

static uint8_t m_adv_handle = BLE_GAP_ADV_SET_HANDLE_NOT_SET; 

then i have added the code snippet 

int8_t tx_power_level = -40;
err_code=sd_ble_gap_tx_power_set(BLE_GAP_TX_POWER_ROLE_ADV,m_adv_handle,tx_power_level);
printf("%d\r\n",err_code);
APP_ERROR_CHECK(err_code);

since if any issue please let me know, i am eagerly waiting for your reply.

thank you.

It seems to me that you are using the advertising library, and you thus do not have advertising handles like this directly.
You should not have to create a separate m_adv_handle variable that will not be used anywhere - this is likely why the SoftDevice rejects it, because it is not set anywhere.
Please try to pass m_advertising.adv_handle as the advertising handle parameter and see if it resolves your issue.

Best regards,
Karl

It seems to me that you are using the advertising library, and you thus do not have advertising handles like this directly.
You should not have to create a separate m_adv_handle variable that will not be used anywhere - this is likely why the SoftDevice rejects it, because it is not set anywhere.
Please try to pass m_advertising.adv_handle as the advertising handle parameter and see if it resolves your issue.

Best regards,
Karl

user87869 said:

m_advertising.adv_handle

Yes, without any errors my code is working now but when i kept tx power value=0 dbm in nrf mobile app it shows -48 to -50 dbm . and if i set -20dbm then it shows -68dbm to -70 dbm .i have doubt that all softdevices have 0 dbm as a default tx power value so then i can i calculate it for meters like how dbm is equal to 1 meter.??

thank you.

I am happy to hear that it functions as expected now!

sagarnayakm said:

i can i calculate it for meters like how dbm is equal to 1 meter.??

The Received Signal Strength Indicator (RSSI) is dependent on a lot of external factors, not just the TXPOWER, and thus it can not be used as an accurate distance measurement. It is also therefore not possible to calculate it based on the distance, since the value will fluctuate based on things like line-of-sight, RF noise, multipath, obstacles in the environment, etc.

Best regards,
Karl

Hello ,

thank you so much mr.karl for your valuable information, the issue has been resolved.

sagarnayakm said:

the issue has been resolved.

Great, I am glad to hear that, sagarnayakm! :) 

sagarnayakm said:

thank you so much mr.karl for your valuable information

No problem at all, I am happy to help!

Please do not hesitate to open another ticket if you should encounter any other issues or questions in the future.

Good luck with your development!

Best regards,
Karl

Hello ,

hi mr.Karl Ylvisaker actually sorry for this question, i have query to ask you but the same query i have raised in devzone and someone answered me but i stuck in that custom characteristics, still i didn't get any reply from him.

the query regarding send a data from nrf connect mobile app to device here i am using ble_app_template example with SDK version 17.0.2 since he told me to use the custom characteristics service by following this tutorial link https://github.com/edvinand/custom_ble_service_example so i started working on it but first part BLE should advertise the custom UUID but in my case its not advertising . so what is the problem i don't know , in the tutorial they have mentioned to use 16.0. version but i am using17.0.2 so is that a problem ??.

thank you.