set tx power level in nrf52810

Hello,

You can change they TX power level by using the sd_ble_gap_tx_power_set function. The valid TX power level configuration for the nRF52810 can be seen in its RADIO TXPOWER register documentation.

Best regards,
Karl

Hello ,

thanks for the reply Karl, actually i am using ble_app_template example for advertising the sensor data for connectable beacon since here i have used this function already but i don't think so the value has changed. so for more details please check my code . here the cod

at the starting i have added below line,

static uint8_t  m_adv_handle = BLE_GAP_ADV_SET_HANDLE_NOT_SET;


after this in advertising_init function i made this changes,

static void advertising_init(void)
{
    ret_code_t             err_code;
    ble_advertising_init_t init;

    memset(&init, 0, sizeof(init));

    int8_t tx_power_level = -40;
    sd_ble_gap_tx_power_set(BLE_GAP_TX_POWER_ROLE_ADV,m_adv_handle,tx_power_level);


    init.advdata.name_type               = BLE_ADVDATA_FULL_NAME;
    init.advdata.include_appearance      = true;
    init.advdata.flags                   = BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE;
    init.advdata.uuids_complete.uuid_cnt = sizeof(m_adv_uuids) / sizeof(m_adv_uuids[0]);
    init.advdata.uuids_complete.p_uuids  = m_adv_uuids;

    init.config.ble_adv_fast_enabled  = true;
    init.config.ble_adv_fast_interval = APP_ADV_INTERVAL;
    init.config.ble_adv_fast_timeout  = APP_ADV_DURATION;

    init.evt_handler = on_adv_evt;

    err_code = ble_advertising_init(&m_advertising, &init);
    APP_ERROR_CHECK(err_code);

    ble_advertising_conn_cfg_tag_set(&m_advertising, APP_BLE_CONN_CFG_TAG);
}

user87869 said:

m_advertising.adv_handle

Yes, without any errors my code is working now but when i kept tx power value=0 dbm in nrf mobile app it shows -48 to -50 dbm . and if i set -20dbm then it shows -68dbm to -70 dbm .i have doubt that all softdevices have 0 dbm as a default tx power value so then i can i calculate it for meters like how dbm is equal to 1 meter.??

thank you.

I am happy to hear that it functions as expected now!

sagarnayakm said:

i can i calculate it for meters like how dbm is equal to 1 meter.??

The Received Signal Strength Indicator (RSSI) is dependent on a lot of external factors, not just the TXPOWER, and thus it can not be used as an accurate distance measurement. It is also therefore not possible to calculate it based on the distance, since the value will fluctuate based on things like line-of-sight, RF noise, multipath, obstacles in the environment, etc.

Best regards,
Karl

Hello ,

thank you so much mr.karl for your valuable information, the issue has been resolved.

sagarnayakm said:

the issue has been resolved.

Great, I am glad to hear that, sagarnayakm! :) 

sagarnayakm said:

thank you so much mr.karl for your valuable information

No problem at all, I am happy to help!

Please do not hesitate to open another ticket if you should encounter any other issues or questions in the future.

Good luck with your development!

Best regards,
Karl

Hello ,

hi mr.Karl Ylvisaker actually sorry for this question, i have query to ask you but the same query i have raised in devzone and someone answered me but i stuck in that custom characteristics, still i didn't get any reply from him.

the query regarding send a data from nrf connect mobile app to device here i am using ble_app_template example with SDK version 17.0.2 since he told me to use the custom characteristics service by following this tutorial link https://github.com/edvinand/custom_ble_service_example so i started working on it but first part BLE should advertise the custom UUID but in my case its not advertising . so what is the problem i don't know , in the tutorial they have mentioned to use 16.0. version but i am using17.0.2 so is that a problem ??.

thank you.  

Hello ,

hi mr.Karl Ylvisaker actually sorry for this question, i have query to ask you but the same query i have raised in devzone and someone answered me but i stuck in that custom characteristics, still i didn't get any reply from him.

the query regarding send a data from nrf connect mobile app to device here i am using ble_app_template example with SDK version 17.0.2 since he told me to use the custom characteristics service by following this tutorial link https://github.com/edvinand/custom_ble_service_example so i started working on it but first part BLE should advertise the custom UUID but in my case its not advertising . so what is the problem i don't know , in the tutorial they have mentioned to use 16.0. version but i am using17.0.2 so is that a problem ??.

thank you.  

Hello again, sagarnayakm

Please stick to using a single ticket for a single issue. I see that you are getting help with this question from my colleague Sigurd, please continue the discussion in the relevant ticket.

It seems to me that your last question to Sigurd was posed just 23 hours ago. This is not outside the expected reply-time.

Best regards,
Karl

Hello,

thanks for the reply KarlYlvisaker its ok, i will wait for his reply.

regards,

sagar

No problem at all, Sagar - I am certain that Sigurd will help you resolve your issues! :)

Best regards,
Karl

Hello Karl,

sorry its little urgent!!. please help me to resolve this problem, still i didn't get any reply. 

thank you.

Hello again, Sagar

I am still certain that Sigurd will provide you with the help you need.
I must also remind you not to open duplicate tickets on the same issue, as these will be marked and closed as duplicates. I see that you have opened one such case today already.

What I can say, however, is that it does not seem like you are providing any specific debug information with your request for help. You mention that you follow the tutorial with version v17 instead of v16, but other than that there is not much for us to debug or go on.
Please consider the information you provide with your request - the easier it is for us to understand what you actual issue is, the faster we can help you resolve it.
You should include information such as debugging steps you have already taken, what you observed and how this differed from what you would have expected, error codes or error messages that appear, etc.
I recommend that you consider this for all requests you make, so that we together may resolve your issues more quickly.

Best regards,
Karl