EVENT_CHANNEL_CLOSED ?

Hi

Unfortunately our ANT expert is out of office for the Easter vacation. They'll get back to you on Tuesday April 19th. Happy Easter!

Best regards,

Simon

Hi Simon,

Thanks for the reply,

From this ant_evt_handler,

static void ant_evt_handler(ant_evt_t * p_ant_evt, void * p_context)
{
    ret_code_t err_code = NRF_SUCCESS;

    if (m_channel != p_ant_evt->channel)
    {
        return;
    }

    switch (m_channel_type)
    {
        case CHANNEL_TYPE_SLAVE:
            /* fall through */
        case CHANNEL_TYPE_SLAVE_RX_ONLY:
            switch (p_ant_evt->event)
            {
                case EVENT_RX:
									  NRF_LOG_INFO("EVENT_RX...\r\n"); 
                    err_code = bsp_indication_set(BSP_INDICATE_CONNECTED);
								    
								    nrf_pwr_mgmt_feed(); //Function for indicating activity.
                    break;

                case EVENT_RX_FAIL:
									  NRF_LOG_INFO("EVENT_RX_FAIL...\r\n"); 
								    NRF_LOG_INFO("RIXTRONIX EVENT_RX_FAIL...\r\n"); 
                    err_code = bsp_indication_set(BSP_INDICATE_RCV_ERROR);
								
                    break;

                case EVENT_RX_FAIL_GO_TO_SEARCH:
									  NRF_LOG_INFO("EVENT_RX_FAIL_GO_TO_SEARCH...\r\n");
								    NRF_LOG_INFO("RIXTRONIX EVENT_RX_FAIL_GO_TO_SEARCH...\r\n"); 
                    err_code = bsp_indication_set(BSP_INDICATE_SCANNING);
                    break;

                case EVENT_CHANNEL_CLOSED:
									  NRF_LOG_INFO("EVENT_CHANNEL_CLOSED...\r\n");
								    NRF_LOG_INFO("BSP_INDICATE_SCANNING...\r\n");//31Mar22 Rixtronix LAB
                    //nrf_pwr_mgmt_shutdown(NRF_PWR_MGMT_SHUTDOWN_GOTO_SYSOFF); //default
								     err_code = bsp_indication_set(BSP_INDICATE_SCANNING);
									  //nrf_pwr_mgmt_shutdown(NRF_PWR_MGMT_SHUTDOWN_CONTINUE);
								    nrf_pwr_mgmt_feed(); //Function for indicating activity.
								    
								
                    break;

                case EVENT_RX_SEARCH_TIMEOUT:
									 //Rixtronix LAB
								   //8 Sept 2021, 
								   //on search timeout, and idle, make device on if there is a signal from sensor ?
									  NRF_LOG_INFO("EVENT_RX_SEARCH_TIMEOUT...\r\n");
                    //err_code = bsp_indication_set(BSP_INDICATE_IDLE);//default
								    err_code = bsp_indication_set(BSP_INDICATE_SCANNING);
								    nrf_pwr_mgmt_feed(); //Function for indicating activity. default
								     
                    break;
            }
            break;
    }
    APP_ERROR_CHECK(err_code);
}

on EVENT_CHANNEL_CLOSED:

How can I rescan again ?

Best regards,

Rixtronix LAB

You can open the channel again by calling sd_ant_channel_open().

Kenneth

You can open the channel again by calling sd_ant_channel_open().

Kenneth

Hi Kenneth,

Thanks for the reply,

So I call sd_ant_channel_open(); at :

 case EVENT_RX_FAIL:
									  NRF_LOG_INFO("EVENT_RX_FAIL...\r\n"); 
								    NRF_LOG_INFO("RIXTRONIX EVENT_RX_FAIL...\r\n"); 
                    err_code = bsp_indication_set(BSP_INDICATE_RCV_ERROR);
								sd_ant_channel_open();
                    break;

                case EVENT_RX_FAIL_GO_TO_SEARCH:
									  NRF_LOG_INFO("EVENT_RX_FAIL_GO_TO_SEARCH...\r\n");
								    NRF_LOG_INFO("RIXTRONIX EVENT_RX_FAIL_GO_TO_SEARCH...\r\n"); 
                    err_code = bsp_indication_set(BSP_INDICATE_SCANNING);
                    sd_ant_channel_open();
                    break;

                case EVENT_CHANNEL_CLOSED:
									  NRF_LOG_INFO("EVENT_CHANNEL_CLOSED...\r\n");
								    NRF_LOG_INFO("BSP_INDICATE_SCANNING...\r\n");//31Mar22 Rixtronix LAB
                    //nrf_pwr_mgmt_shutdown(NRF_PWR_MGMT_SHUTDOWN_GOTO_SYSOFF); //default
								     err_code = bsp_indication_set(BSP_INDICATE_SCANNING);
									  //nrf_pwr_mgmt_shutdown(NRF_PWR_MGMT_SHUTDOWN_CONTINUE);
								    nrf_pwr_mgmt_feed(); //Function for indicating activity.
					           sd_ant_channel_open();			    
								
                    break;

                case EVENT_RX_SEARCH_TIMEOUT:
									 //Rixtronix LAB
								   //8 Sept 2021, 
								   //on search timeout, and idle, make device on if there is a signal from sensor ?
									  NRF_LOG_INFO("EVENT_RX_SEARCH_TIMEOUT...\r\n");
                    //err_code = bsp_indication_set(BSP_INDICATE_IDLE);//default
								    err_code = bsp_indication_set(BSP_INDICATE_SCANNING);
								    nrf_pwr_mgmt_feed(); //Function for indicating activity. default
								     
                    break;

Best regards,

Rixtronix

I suggest to check out the api documentation:

/** @brief This function opens and activates a channel. The channel to open must be in an assigned state. When opening a master channel,
 *         a supplied offset can be provided in order to suggest a minimum channel start time offset (from when the command is issued) to
 *         the ANT stack. Specifying CHANNEL_START_OFFSET_NONE will result in default channel start up behaviour. When opening a slave channel,
 *         CHANNEL_START_OFFSET_NONE must be used.
 *
 * @param[in] ucChannel is an unsigned char (1 octet) denoting the channel to open.
 *  param[in] usOffset is an unsigned short (2 octet) denoting the offset from which to start the channel.  See Channel Start Offset in ant_parameters.h
 *
 * @return  ::NRF_SUCCESS
 *          ::NRF_ANT_ERROR_INVALID_PARAMETER_PROVIDED
 *          ::NRF_ANT_ERROR_CHANNEL_IN_WRONG_STATE
 */
#define sd_ant_channel_open(ucChannel)      sd_ant_channel_open_with_offset(ucChannel, CHANNEL_START_OFFSET_NONE)
SVCALL(SVC_ANT_CHANNEL_OPEN, uint32_t, sd_ant_channel_open_with_offset(uint8_t ucChannel, uint16_t usOffset));

Hi Kenneth,

Thanks for the reply,

Can I make :

 case EVENT_RX_SEARCH_TIMEOUT:
									 //Rixtronix LAB
								   //8 Sept 2021, 
								   //on search timeout, and idle, make device on if there is a signal from sensor ?
									  NRF_LOG_INFO("EVENT_RX_SEARCH_TIMEOUT...\r\n");
                    //err_code = bsp_indication_set(BSP_INDICATE_IDLE);//default
								    err_code = bsp_indication_set(BSP_INDICATE_SCANNING);
								    nrf_pwr_mgmt_feed(); //Function for indicating activity. default
								     /****21Apr22 Rixtronix LAB****
								     err_code=sd_ant_channel_open(HRM_CHANNEL_NUM);
								     err_code=sd_ant_channel_open(BSC_CHANNEL_NUM);
								     err_code=sd_ant_channel_open(BPWR_CHANNEL_NUM);
								      *******/
                    break;

Regards,

Rixtronix

I believe this should work yes, though you should only open the channel that for instanced closed or timeout.

Kenneth

Hi Kenneth,

Thanks for the reply

How do we know which channel is closed ? I have HRM and BSC and BPWR ?

I want to log it to SDcard on different state, but always crashed, any ideas ?

Regards,

Rixtronix